keg conversion

[goodbrew]

I have a keg and need the top cut off. Does anyone know of a local place the can cut it with a plasma cutter?

[BigWally]

Just about any welding shop can do it.

Or, you can use a Dremmel tool and a few metal cut-off wheels. Just be sure to wear safety glasses and ear plugs. You could also pick up a cheap angle grinder ($14) and metal cut-off wheels (10 for $7) at Harbor Freight to do the job.

[groovyslick]

if you want to go the angle grinder option I have a grinder and jig to get it straight. you would just need the grinder wheels.
message me at groovyslick at yahoo if you want to do that.
jason