keg conversion
Moderator: Jimmy Orkin
keg conversion
I have a keg and need the top cut off. Does anyone know of a local place the can cut it with a plasma cutter?
Re: keg conversion
Just about any welding shop can do it.
Or, you can use a Dremmel tool and a few metal cut-off wheels. Just be sure to wear safety glasses and ear plugs. You could also pick up a cheap angle grinder ($14) and metal cut-off wheels (10 for $7) at Harbor Freight to do the job.
Or, you can use a Dremmel tool and a few metal cut-off wheels. Just be sure to wear safety glasses and ear plugs. You could also pick up a cheap angle grinder ($14) and metal cut-off wheels (10 for $7) at Harbor Freight to do the job.
Maybe the purpose of your life is to serve as a warning to others.
- groovyslick
- Posts: 83
- Joined: Thu Nov 18, 2010 5:00 pm
Re: keg conversion
if you want to go the angle grinder option I have a grinder and jig to get it straight. you would just need the grinder wheels.
message me at groovyslick at yahoo if you want to do that.
jason
message me at groovyslick at yahoo if you want to do that.
jason