Orlando,
Could you post some pics of your keg washer setup. I want to build one right away. What harbor freight pump did you use? Size of PVC? Homebrew at Waynes was cool. What a great time. Any help would be appreciated.
Bart Askew- new member and single tier owner
[email protected] or mac.com
Keg Washer-Orlando?
Moderator: Jimmy Orkin
Re: Keg Washer-Orlando?
Which keg washer? For Sanke Kegs or for Corny Kegs? I have set ups for both? I do not have a digital camera so I can't post a pic.
This is the pump I use: http://www.harborfreightusa.com/usa/ite ... al%20Pumps
It is a little expensive, and you don't need a 1hp pump to get the job done. I had a coupon when I bought mine. Harbor Freight, usually comes out w/ a 20% off coupon at least 2-3 times a month.
A few of the guys have similar set ups to mine to clean corny kegs. The concepts are all the same, but each of us use different pumps.
I use 3/4" PVC pipe.
Orlando
This is the pump I use: http://www.harborfreightusa.com/usa/ite ... al%20Pumps
It is a little expensive, and you don't need a 1hp pump to get the job done. I had a coupon when I bought mine. Harbor Freight, usually comes out w/ a 20% off coupon at least 2-3 times a month.
A few of the guys have similar set ups to mine to clean corny kegs. The concepts are all the same, but each of us use different pumps.
I use 3/4" PVC pipe.
Orlando
Orlando Guerra
"You Can't Drink All Day If You Don't Start In The Morning"
"You Can't Drink All Day If You Don't Start In The Morning"
-
- Posts: 325
- Joined: Sun Jan 11, 2009 7:47 pm
Re: Keg Washer-Orlando?
Orlando, I liked your setup at the last brewday went to.. wonder if a similar setup can be done for carboys? did you use any sort of disperser, ie. like a fountain head, at the top of the pvc? I can't remember..
Beer contains just a small amount of vitamins - that's why it's necessary to drink lot of it
Re: Keg Washer-Orlando?
No, I did not use a fountain head. But what I did do was place a PVC "cap" at the end of the pipe and cut a large "X" through the cap so water could spray out the end.
I guess it could be done with a carboy, but I have not tried it.
Orlando
I guess it could be done with a carboy, but I have not tried it.
Orlando
Orlando Guerra
"You Can't Drink All Day If You Don't Start In The Morning"
"You Can't Drink All Day If You Don't Start In The Morning"